Versatile liner: the first iglidur® tribo-tape

The tribo-tape liner from igus® can be used to line a variety of tribologically stressed surfaces and shapes to optimise transportation tasks, for machine beds, etc. With a thickness of only 0.5 - 1 mm (including adhesive back + 0.15 mm), the space requirement is very low. The easy workability (the tape can be cut using scissors) and optional self-adhesive back on the liner result in almost unlimited possibilities for use.

Lubricant- and maintenance-free

Easy to cut

Adherent

Suitable for the smallest installation spaces


Typical applications:Mechanical engineering, materials handling, fixture construction, installation technology, etc.

A180 tribo-tape liner  
V400 tribo-tape liner  

Liner material: iglidur® A160

Low coefficient of friction

Best wear-resistance

Upto +90 °C


Compared to similar thin liners, the cost-effective iglidur® A160 tape has a very high wear resistance.

Liner material: iglidur® V400

Extremely wear resistant

Highly resistant to media

Upto +200 °C


Tests have shown the extremely wear-resistant and highly media and temperature-resistant iglidur® V400 tape to be up to 10 times more wear resistant than special products for machine beds and the like.

The iglidur® tribo-tape liner is also available with a self-adhesive back for quick and easy installation. With a self-adhesive back, iglidur® A160 can be used at temperatures of up to 70°C and V400 at temperatures of up to 170°C.

 
iglidur® V400 tribo-tape liner  
A160 tribo-tape liner wear

Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0.5 m/min
 
Y = Wear/mass decrease [mg/km]
 
A = polycarbonate (PC)
B = compound liner
C = polyetheretherketone (PEEK)
D = polyetheretherketone (PEEK) mod. 1
E = polyetheretherketone (PEEK) mod. 2
F = polyethylene terephthalate (PET)
G = iglidur® A160

 
V400 tribo-tape liner wear

Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0,5 m/min
 
Y = Wear/mass decrease [mg/km]
 
A = iglidur® V400
B = PTFE-bronze Compound

 

Liner: iglidur® tribo-tape A160

Delivery program:
Part No.:
Part Number Film thickness    
 A160-T-005-0020 0.5 - Upon request 
 A160-T-005-0020-G 0.65 with adhesive back Upon request 
 A160-T-005-0050 0.5 - Upon request 
 A160-T-005-0050-G 0.65 with adhesive back Upon request 
 A160-T-005-0100 0.65 - Upon request 
 A160-T-005-0100-G 0.65 with adhesive back Upon request 
 A160-T-005-0500 0.5 - Upon request 
 A160-T-005-0500-G 0.65 with adhesive back Upon request 
 A160-T-010-0500 1 - Upon request 
 A160-T-010-0500-G 1.15 with adhesive back Upon request 
More about selected part:
3D-CAD Sample request PDF Quote request Price list myCatalog

Liner: iglidur® tribo-tape V400

Delivery program:
Part No.:
Part Number Film thickness    
 V400-T-005-0120 0.5 - Upon request 
 V400-T-005-0120-G 0.65 with adhesive back Upon request 
More about selected part:
3D-CAD Sample request PDF Quote request Price list myCatalog
Ordering key:
Tribo-tape ordering key  

Adhesive back
G1 = temperature -20°C to +70°C
G2 = temperature -40°C to +170°C
 
width [mm]
 
thickness [mm]
 
Tape
 
iglidur®-Material

Technical data

Genera l features Unit iglidur® A160 iglidur® V400 test method
Density g/cm³ 1,0 1,51
Colour blue white
Max. humidity absorption at 23°C/50% R. H. Wt.-% 0,1 0,1 DIN 53495
Max. water absorption Wt.-% 0,1 0,2
Coefficient of surface friction, dynamic, against steel µ 0,09 - 0,19 0,15 - 0,20
pv value, max. (dry) MPa x m/s 0,25 0,5

Mechanical properties
Bending E-module MPa 1.151 4.500 DIN 53457
Tensile strength at +20 °C MPa 19 95 DIN 53452
compressive strength MPa 37 47
Maximum recommended surface pressure (20° C) MPa 15 45
Shore D-hardness 60 74 DIN 53505

Physical and thermal properties
Max. long term application temperature °C +90 +200
Max. short term application temperature °C +100 +240
Minimum application temperature °C -50 -50
thermal / heat conductivity [W/m x K] 0,30 0,24 ASTM C 177
Coefficient of thermal expansion (at 23° C) [K-1 x 10-5] 11 3 DIN 53752

Electrical properties
Specific forward resistance Ωcm > 1012 > 1012 DIN IEC 93
Surface resistance Ω > 1012 > 1012 DIN 53482

 
chemical resistance iglidur ® A160 iglidur ® V400
Alcohols + +
Hydrocarbons + +
Greases, oils without additives + +
Fuels + to 0 +
Diluted acids + +
Strong acids + +
Diluted bases + +
Strong bases + -
Radioactive rays [Gy] to 1 x 105 2 x 104
+ Resistant 0 conditionally resistant – not resistant

Because of a current peak in orders, our delivery times have increased temporarily to 6-12 working days for e-chainsystems® and chainflex® cables. We are doing all we can to reduce delivery times as quickly as possible.

Sales partner
igus® Singapore Pte Ltd. 84 Genting Lane
#06-03 Cityneon Design Centre
Singapore 349584
Tel.: +65 6487 1411
Fax: +65 6487 1511

igus® contact E-Mail to igus® Singapore Pte Ltd.

myigus myCatalog

3D-CADOnline catalogNews 2016Product finder plain bearingsProduct finder piston ringsProduct finder for semi-finished productsLifetime calculationApplication examplesEmail the product expertInquiry/orderQuickSpecPart No. searchShaft inquiryCatalogs/samplesDownloadmanus® Competition

No minimum order value
830 - 1730 Delivery+Consultation Delivery from 24h* Free samples

More than 2700 items in stock Singapore, more than 100.000 items within 2-3 weeks. igus® order processing from 8.30am - 5.30pm (Mon-Fri). igus® order despatched in 24hrs!

Newsletter Registration
Terms and Conditions Imprint General Information Data Privacy Protection Declaration
This website uses cookies. By continuing to browse this website you agree to our use of cookies.