My contact person
Select location

After selection of your ZIP code, we designate the relevant staff to attend to you at once.

Bar stock for motion

The round rods made of of the iglidur® range of bar stock can be ordered in individual lengths from 100 mm to 1000 mm and with a diameter of 10 mm to 100 mm. We offer different materials to meet the different requirements of each application. Here, you can find the right round-rod material - whether for low, medium or high speeds, for temperatures up to 250 °C or for mainly stationary or extreme loads, in other words for almost every requirement.
Like every igus® product, the round rods are also suitable for absolutely lubrication-free use and are therefore not only maintenance-free but are also especially hygienic.
For example, iglidur® round rods are used in the area of medical technology and in the food and packaging industry.

Products

Filter

Core Requirements
Requirements
Material

Number of products: 27

iglidur® J350, round bar
  • Excellent coefficient of friction against steel
  • Continuous service temperature up to +180 °C
  • For medium to high loads
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Particularly well-suited to rotating movements

from 75.36 USD / m

To the product page
iglidur® A160, round bar
  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • High media resistance
  • self lubricating and maintenance-free

from 36.00 USD / m

To the product page
iglidur® A500, round bar
  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • Temperature resistant from -100 °C to +250 °C
  • High chemical resistance
iglidur® P210, round bar
  • Low moisture absorption
  • Good coefficients of friction and wear on almost every shaft
  • Good price/performance ratio

from 80.23 USD / m

To the product page
iglidur® A180, round bar
  • Complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • High wear resistance

from 9.91 USD / m

To the product page
iglidur® J, round bar
  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption

from 10.30 USD / m

To the product page
iglidur® JB, round bar
  • Low wear
  • Low coefficient of friction
  • Low humidity absorption
  • Good media resistance

from 57.85 USD / m

To the product page
iglidur® T220, round bar
  • Free from ingredients banned or unwanted by the tobacco industry
  • The material complies with food and drug administration (FDA) regulations

from 91.34 USD / m

To the product page
iglidur® A350, round bar
  • For use with temperatures up to +180 °C
  • Comply with the requirements of the FDA
  • For medium to high loads
  • Equally good for both oscillating and rotating applications
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Lubrication- and maintenance-free

from 38.02 USD / m

Available on request
To the product page
iglidur® J4, round bar
  • Lubrication and maintenance-free
  • Low-cost material for mass production
  • Low coefficients of friction
  • Good media resistance
  • Low moisture absorption

from 22.00 USD / m

To the product page
iglidur® H1, round bar
  • High wear resistance in extreme ambient conditions
  • Very low coefficients of friction
  • High resistance to temperature and chemicals
  • For underbonnet applications
  • Lubrication and maintenance-free

from 196.62 USD / m

To the product page
iglidur® HSD350, round bar
  • Sterilisable
  • For continuous use up to +180° C
  • High media resistance
  • Corrosion-free
  • For wet environments
  • self-lubricating and maintenance-free

from 234.22 USD / m

To the product page
iglidur® J3, round bar
  • Specialist for pivoting and pulsating loads
  • Good media resistance
  • Low moisture absorption
  • PTFE-free

from 18.69 USD / m

To the product page
iglidur® F2, round bar
  • Used to prevent electrostatic charges
  • Also suitable for wet applications
  • Lubrication and maintenance-free

from 137.88 USD / m

To the product page
iglidur® J200, round bar
  • Very long service life with hard anodized aluminum
  • Low coefficients of friction
  • Low wear
  • For low to medium loads
  • Self-lubricating and maintenance-free

Consulting

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:

24h