igusigus-icon-cart(0)

Gears & Gear racks Online-Shop

The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
In the industry's largest test laboratory, the gears made of iglidur® materials are thoroughly tested to continuously improve their service life.

Categories
Filters
Size
Temperatures

Number of products 21

iguform S270 gears, mm

New
iguform S270 gears, mm
attributes_S270GM-ST-050-013-00-020-R_attr_USP
SGD 2.20/Pc.Cost-effective price break available onlineSGD 0.67/Pc. 100 Pc.

317 variant(s), of which:

igus-icon-lieferzeit
313 Ready for shipment within 7-10 working days

igutek P360 gears, mm

New
igutek P360 gears, mm
  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads

8 different modules available. Choose from over 300 dimensions.

[Link id="302"]

For information on tolerances, please refer to the product description.
SGD 2.55/Pc.Cost-effective price break available onlineSGD 0.86/Pc. 100 Pc.

316 variant(s), of which:

igus-icon-lieferzeit
312 Ready for shipment within 7-10 working days

iguform S270 gear racks, mm

New
iguform S270 gear racks, mm
  • Low coefficient of friction
  • Low humidity absorption
  • Low-noise
SGD 5.85/Pc.Cost-effective price break available onlineSGD 2.62/Pc. 100 Pc.
0

igutek P360 gear racks, mm

New
igutek P360 gear racks, mm
  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads
SGD 6.76/Pc.Cost-effective price break available onlineSGD 3.10/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 7-10 working days

iglidur® F, gear, mm

iglidur® F, gear, mm
  • Electrically conductive 
  • High compressive strength
  • Good temperature resistance
  • Available in 3 hub designs
Upon request

9 variant(s), of which:

igus-icon-lieferzeit
9 Delivery time on request

iglidur® A500 gear, mm

iglidur® A500 gear, mm
  • The endurance runner at higher temperatures in the food sector
  • Compliant with Regulation (EU) No. 10/2011
  • FDA compliant
  • Temperature resistant from -100°C to +250°C

xirodur® B180, gear, mm

xirodur® B180, gear, mm
Tech up
  • Low coefficient of friction
  • Wear-resistant material for continuous operation
  • Vibration-dampening

Cost down
  • Cost-effective due to injection moulding
  • Maintenance-free with the use of iglidur® materials
  • Long service life

Proof
  • iglidur® gears are already being used successfully in our gearboxes

Sustainability
  • Environmentally friendly as no additional lubricants needed
  • Good coefficient of wear and therefore a long service life
  • igus supports the circular economy of plastics and is investing in chemical recycling. Learn more about this topic at: www.igus.eu/plastic2oil 
SGD 10.98/Pc.Cost-effective price break available onlineSGD 6.12/Pc. 100 Pc.

9 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 24 - 48 hours

iguform S270 bevel gears - ratio 1:1

iguform S270 bevel gears - ratio 1:1
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.
SGD 2.55/Pc.Cost-effective price break available onlineSGD 0.86/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 7-10 working days

igutek P360 bevel gears - ratio 1:1

igutek P360 bevel gears - ratio 1:1
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.
SGD 2.77/Pc.Cost-effective price break available onlineSGD 0.97/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 7-10 working days

iguform S270 bevel gears - ratio 1:1,5

iguform S270 bevel gears - ratio 1:1,5
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.
SGD 8.47/Pc.Cost-effective price break available onlineSGD 4.01/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 Ready for shipment within 7-10 working days

igutek P360 bevel gears - ratio 1:1,5

igutek P360 bevel gears - ratio 1:1,5
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: In order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.
SGD 9.96/Pc.Cost-effective price break available onlineSGD 4.81/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 Ready for shipment within 7-10 working days

iguform S270 bevel gears - ratio 1:2

iguform S270 bevel gears - ratio 1:2
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.
SGD 5.97/Pc.Cost-effective price break available onlineSGD 2.68/Pc. 100 Pc.

10 variant(s), of which:

igus-icon-lieferzeit
10 Ready for shipment within 7-10 working days

igutek P360 bevel gears - ratio 1:2

igutek P360 bevel gears - ratio 1:2
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.
SGD 7.11/Pc.Cost-effective price break available onlineSGD 3.29/Pc. 100 Pc.

10 variant(s), of which:

igus-icon-lieferzeit
10 Ready for shipment within 7-10 working days

iguform S270 bevel gears - ratio 1:3

iguform S270 bevel gears - ratio 1:3
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet


Please note: In order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:3) can be combined with each other. Please make sure to select the same module.
SGD 4.71/Pc.Cost-effective price break available onlineSGD 2.01/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 7-10 working days

igutek P360 bevel gears - ratio 1:3

igutek P360 bevel gears - ratio 1:3
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:3) can be combined with each other. Please make sure to select the same module.
SGD 5.51/Pc.Cost-effective price break available onlineSGD 2.43/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 7-10 working days

iguform S270 bevel gears - ratio 1:4

iguform S270 bevel gears - ratio 1:4
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:4) can be combined with each other. Please make sure to select the same module.
SGD 3.91/Pc.Cost-effective price break available onlineSGD 1.58/Pc. 100 Pc.

6 variant(s), of which:

igus-icon-lieferzeit
6 Ready for shipment within 7-10 working days

igutek P360 bevel gears - ratio 1:4

igutek P360 bevel gears - ratio 1:4
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:4) can be combined with each other. Please make sure to select the same module.
SGD 4.71/Pc.Cost-effective price break available onlineSGD 2.01/Pc. 100 Pc.

6 variant(s), of which:

igus-icon-lieferzeit
5 Ready for shipment within 7-10 working days

iguform S270 bevel gears - ratio 1:5

iguform S270 bevel gears - ratio 1:5
  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:5) can be combined with each other. Please make sure to select the same module.
SGD 3.91/Pc.Cost-effective price break available onlineSGD 1.58/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 Ready for shipment within 7-10 working days

igutek P360 bevel gears - ratio 1:5

igutek P360 bevel gears - ratio 1:5
  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:5) can be combined with each other. Please make sure to select the same module.
SGD 4.71/Pc.Cost-effective price break available onlineSGD 2.01/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 Ready for shipment within 7-10 working days

igutek P360 angular gears, mm

igutek P360 angular gears, mm
  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads

Shopping at igus®