guidelite guide trough - cost-effective and fast realisation of travel distances up to 150 m

As a modular system for long travel distances, especially for slow applications with low cycle numbers, the lower run of the e-chain® is guided in two L-shaped guide rails made of glass fibre reinforced plastic. The upper run of the e-chain® is partially guided by guide brackets, which are mounted at intervals of one metre. The correct width can be achieved by clipping crossbars (version01) between the brackets. This makes installation very easy, as no readjustment is necessary. There is also the option of attaching the guide brackets to a C-profile for a wider range of widths (version 02).

1

Corrosion-free:Completely made of plastic components

2

cost-effective:Available as a modular system with e-chain®

3

Time-saving:Easy and quick assembly

4

2 versions of mounting sets:

1. With crossbar for a fixed width or with
2. C-profile for a wider range of widths

Time saving due to quick assembly

Very light thanks to plastic components and quieter than metal guide troughs

cost-effective

corrosion-free

sliding operation: max. Speed 1 m/s

Unsupported operation (guidelite as support tray): max. Speed 5 m/s, higher speeds are not excluded, please contact us if required

Modular system, available from stock

Typical industries and applications

Watering trolleys (watering potted plants)

For applications with a low number of cycles, low speed and additional load

As a favourable support tray for unsupported applications

For the following igus®® series

E2/000

●2500

●2700

●3500

E4.1

●E4.21

●E4.28

●E4.32

Components - Version 01

1

Guide angle

2

Plastic guide rail

3

crossbar, clip-in

Ba = e-chain® outer width
Bi = e-chain® inner width
BB = bar length
A = Angular outer spacing
B = Angular inner distance
(Dimension B must always be 1 to 4 mm
greater than Ba of the e-chain® )

For the following igus®® series

E2/000

●1500

●2500

●2700

●3500

E4.1

●E4.21

●E4.28

●E4.32

Components - Version 02

1

Guide angle

2

Plastic guide rail

4

screw set M8

5

C-profile

Ba = e-chain® outer width
Bi = e-chain® inner width
BRA = angular outer distance
BRi = Angular inside distance
BRi = Ba + 2
LLL = Length C-profile