Please choose your delivery location

The selection of the country/region page can influence various factors such as price, shipping options and product availability.
My contact person
Select location

After selection of your ZIP code, we designate the relevant staff to attend to you at once.

SG(EN)

Saves 3 devices and a lot of space... Now 4 sensors in one switch cabinet module


New second generation of the universal switch cabinet module i.Sense:modul II

The further developed i.Sense:modul II offers you a variety of new possibilities and application scenarios for smart condition monitoring. Specifically, with this new generation, four status sensors can be connected to just one switch cabinet module at the same time, which means considerable space and cost savings. And not only in the switch cabinet, but also in the chain itself, as only one cable needs to be run for every four sensors. 
 
In addition to these directly noticeable improvements, the new module now also offers a variety of typical Industry 4.0 applications, such as remote resetting via WLAN or SMS, or the SMS/e-mail alarm function in the event of movement anomalies of the energy supply system. The selection of the communication path for configuration and data download with the i.Sense:modul II is exceptionally versatile. In addition to the stationary connections via USB or LAN cable, this can also be done completely over-the-air via WLAN or Bluetooth with any conventional mobile device. 
 
Part number: IS.EC. U04.01.01.0.BETA 
Make an appointment directly for a live demo

Improve technology

Tech up

  • Configuration and sensor data download on many channels (USB, LAN, WLAN, Bluetooth, etc.) and various terminal devices
  • SMS/e-mail alarm
  • Position-dependent force limit determination via GPS (optional)
  • Remote reset via LAN/WiFi/SMS (with i.Cee connection)
  • Extension with remote sensor box with up to 4 additional sensors
Cost down

Cost down

  • Up to 4 sensors for condition monitoring in one module (instead of one module for each sensor)
  • Only one additional cable in the chain
  • SD card is completely omitted
     
Proof

Proof

  • Ongoing testing in the industry's largest test laboratory  for dynamic power transmission systems
Sustainability

Sustainability

  • Unplanned service deployments can be prevented - eliminating 100km of travel saves about 3.6kg of CO²

Presentation of new products by Richard Habering

What does condition monitoring (i.Sense) do?

Condition monitoring is the fastest, simplest way to combine many igus® products to form a self-monitoring smart plastics product. Sensors are mounted to measure values (such as temperature, forces and sound waves/vibrations) within pre-defined limits. Values outside the limits result in an alert or at least a notification. This information provides the basis for taking subsequent steps, such as maintenance or shutting down the system. As desired, values outside defined limits can directly trigger a system shut-down in order to prevent damage that is expensive to repair.
At igus®, we use the term "i.Sense" to refer to condition monitoring.

How do the condition sensors (EC.P) work?

  • The EC.P (EC = e-chain P = pull force) sensor is mounted on the (floating) moving end of the e-chain.
  • There, it measures pull forces applied to the e-chain.
  • If force thresholds are exceeded, the sensor reports the event and, as necessary, switches off  the system to prevent expensive damage to the system.  

Industry 4.0: real-world examples

Customer applications with smart plastics


Smart project planning

Project planning Get to know customised solutions for very special applications now.
Find out more

Smart consulting tool

smart tool With just a little information about your application, you can make the right choice of smart plastics.  
Find out more

Smart brochure

smart brochure This brochure provides a quick overview of all igus activities relating to Industry 4.0 and the Internet of Things.  
Find out more


Consulting

I look forward to answering your questions

Shipping and consultation

In person:

Monday to Friday from 8:30 am - 5:30 pm.

Online:

24h


The terms "igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "igutex", "kineKIT", "manus", "motion plastics", "pikchain", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", and "xiros" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention on this website. The products offered by igus® are those of igus® GmbH