e-spool flex light

Cable drum rethought

For particularly cost-effective integration
Cable drum in igus design, with reduced maintenance requirements and optimum protection of the guided cables. Intended for integration into existing structures and thus reduced to the technological core without its own housing in order to save weight, space and, last but not least, costs.

Tech up

No cable interruption, slip-ring-free

Cost down

Flex light large: Up to 66% more extension length (compared to the SPFL.250)

Proof

Tested in the igus laboratory

Sustainability

No additional copper components in the system (except cable copper)

e-spool flex light variants

The e-spool flex light is the igus version of a cable drum without a slip ring. The cable is always guided safely through a feed-through to ensure that it is properly wound up at all times. For cable diameters from 5mm to 15mm and extension lengths from 3 to 25 metres.

e-spool flex light mini SPFL.120

The e-spool flex light (mini SPFL.120) is the smallest igus version in the flex light series. Cable diameters from 5mm to 7mm can be used.

Enquire about e-spool flex light mini now

e-spool flex light medium SPFL.200

Design study

Another new version of the e-spool flex light is the e-spool flex light medium SPFL.200 2. Its design is based on the e-spool flex mini, which is completely clicked together with injection-moulded parts so that hardly any screws are required.

Enquire about e-spool flex light medium now

e-spool flex light SPFL.250

You can use the e-spool flex light (SPFL.250) for cable diameters from 5mm to 15mm.

Enquire about e-spool flex light medium now

e-spool flex light large SPFL450

Another new version is the bigger e-spool flex light large SPFL.450. With a cable diameter of 11mm, an extension length of up to 17m is possible, the cable diameter of 8mm even allows up to 25m. This means that the extension length is up to 66% greater than that of the SPFL.250.

Enquire about e-spool flex light large now

Part No.	SPFL.120.07.01.SP	SPFL.200.08.01.SP	SPFL.250.08.01.SP	SPFL.250.11.01.SP	SPFL.250.15.01.SP	SPFL.450.08.01.SP	SPFL.450.11.01.SP
Cable diameter	5-7mm	5 - 8mm	5 - 8mm	8 - 11mm	11 - 15mm	5 - 8mm	8 - 11mm
Extension length	3m	7m	15m	10m	5m	25m	17m
Required cable length inside the chain	1.1m	2.6m	4.5m	3.3m	2.4m	4.7m	3.5m
System weight	2.0kg	2.7kg	8.7kg	8.9kg	9.2kg	15.4kg	3.5m

Information material

Documentation

This documentation will provide you with all important information about e-spool flex mini - from technical data to hazard warnings to safety instructions.

Download documentation now

Assembly instructions e-spool flex light

Assembly instructions for e-spool flex light

In these assembly instructions, we show you how to assemble the e-spool flex light.

Download assembly instructions

Assembly instructions e-spool flex light mini

Assembly instructions for e-spool flex light mini

In these assembly instructions, we show you how to assemble the e-spool flex light mini.

Download assembly instructions

Panel feed e-spool flex 2.0

Cable drum without slip ring

**Tech up:**Slip ring-free guidance for electricity, data, liquids or air. Can be equipped with any type of cable.

Cost down: No slip ring and cost-effective in the event of repairs, as individual components can be replaced.

Go to e-spool flex 2.0

White paper: Slip ring-free cable drum with spiral guide

With a newly developed cable drum for operating panels,
robot users avoid tangled cables and trip hazards in automated production. Since the new solution does not use slip rings, media, data and the power and signal supply of the emergency stop button can also be integrated into the system. Download the white paper to find out more.

Download white paper now

Consulting

I look forward to answering your questions

Han Song (Denis) Yap

Senior Product Manager for e-chain® ASEAN

+65 9834 4953 Write e-mail

Shipping and consultation

In person:

Monday to Friday from 8:30am - 5.30 pm.

Online:
24h

WhatsApp-Service:
Monday - Friday: 8:30am - 5.30 pm.